People often love to use carpets in their home mainly because of its looks & Appeal. Not only that, carpet flooring is having lots of benefits. So, carpet flooring is one of the on-demand flooring options in today’s market.
It’s crazy fastly spreading all over the world in both commercial and residential spaces as well.
In general, homeowners use carpet flooring for common areas because of their comfort. Especially in Arizona, you can see most of the homeowners prefer carpet flooring when they have kids. The intention behind this is to reduce the risk of injury during slips, skids or fall.
Usually, there is no other substitute to carpet flooring in terms of protection and absorption of warmth and overall comfort. Along it might have some cons but there are simply minute when you think about the benefits of carpet flooring.
However, any carpet fiber you choose will have its own pros and cons to consider. The comfort and other aspects of carpet flooring often suit carpet in common areas whereas in other uncommon areas like storerooms, bathroom and other places you shouldn’t use the carpet because its simply waste in those areas.
Let’s find out some of the best advantages of carpet in this post. So that you can make an informed decision in choosing the best quality carpet that suits in common areas.
Advantages of Carpets:
Long term budget/Short Term Budget – One of the reasons for choosing carpet is due to its cost efficiency.
Though carpet is not as expensive as other flooring options the design of your space does not have to be compromised at all.
However, carpet is a type of material that will wear out, depending on traffic levels, carpet quality, and maintenance. Based on these aspects you should select the best carpet with a life span of a minimum 5-10 years. Your carpet represents a substantial investment. Cheap fibred carpets may look and feel luxurious in the short term but may be a problem in the long term, particularly in high traffic areas. Investing in a high-quality carpet could be the most cost-effective option for your home.
Sound Absorption – Add Carpets and reduce the noise. Again carpet will come first in this element as well. There is no material that comes close to the sound absorption and insulation of the carpet. You can accomplish an attractive flooring solution in choosing carpet; simultaneously it is extremely flexible acoustical aid which reduces the impact of noise.
Longevity – For a better life span and best longevity of your carpet, you should go with regular cleaning and maintenance.
Style – Any fiber you choose in carpeting, it has its pros and cons with regards to style and will have one’s own preferences. Style is the best considering factor on what you want to be installed and the appearance you are looking for in your property.
Ultimately, these are the most important aspects that should be covered while choosing to install carpet in your common areas. Picking the best carpet for common areas is not only to enhance the ambiance of your property but also to hold the comfort levels throughout the lifetime.
Made from a mixture of polyvinyl chloride and plasticizers, this modern flooring known as vinyl is often used for high traffic areas where its durability is gladly welcomed. Vinyl flooring is flexible, versatile, and can be made in a variation of colors and patterns. It is a fairly more affordable option than other flooring options.
To choose the right vinyl look for your home we have two options: Inlaid and Printed.
Inlaid vinyl refers to when color granules are embedded into the vinyl sheet. This gives the vinyl a deeper look and provides the option for many colors. When examined closely, speaks of varying shades can be seen, which create the overall hue.
Printed vinyl is just the same as it sounds; a pattern or color is printed directly onto the vinyl. This type of vinyl flooring is very popular and looks very beautiful which makes it the first choice for homes. Because of the nature of printed vinyl, it can be made to look like other, more expensive, flooring.
Homeowners can achieve the look of hardwood or marble flooring, even if it isn’t in their budget.
All features may not be found in both sheet and tile goods. Quality features for vinyl include: “no wax surfaces,” degree of gloss and surface texture, recovery capabilities, whether sunlight protected, underfoot comfort, and the thickness of the top wear layer.
Like most flooring, vinyl can come in different sizes and shapes to better fit the look of the room. Flooring can be made as per the requirement like sheets, tiles, or planks.
Sheet Vinyl – Vinyl sheet flooring is a single roll of flooring usually 6 to 12 feet wide. Vinyl sheet limits the number of seams and is also great for high-moisture areas like bathrooms and kitchens.
Vinyl flooring is also offered with three different types of wear surfaces:
Vinyl Tiles – Tiles are great when vinyl is made to look like marble or other classically tiled flooring. It can be relatively easy to install and creates a cohesive look in a new room. One of the benefits of having individual tiles is that they’re easier to replace when one is damaged. You can also use vinyl tiles to arrange a pattern.
Vinyl Plank – Planks are ideal for vinyl flooring that is made to look like hardwood, as it imitates how wood flooring is cut. Vinyl planks also provide more stain resistance and durability than traditional hardwood planks.
How to Choose Vinyl Planks:
Vinyl Plank flooring is often the most trusted and used flooring in the US. Vinyl plank floor is nothing but a simple engineered floor covering design which is used to mimic the look of the classic and real wood. When you are about to choose your vinyl flooring you’ll have to follow some measure to ensure you choose perfect vinyl planks for your flooring.
Follow the below steps to choose vinyl planks for your home.
Choose perfect Thickness of vinyl planks:
Usually, vinyl planks come with different thickness options such as 2-3mm, 3-5mm, and more. You have to be sharper in selecting the best vinyl plank.
So, always make sure you check out for perfect thickness and opt for planks between 3.2-4.0mm because these are the most common types of flooring which can upstand for high traffic areas. This thickness is also good for durability and affordability as well.
Compare and select wear layers:
In general, you will find lots of wear layers. So, compare and choose the best wear layers for your home. If you are going for affordable wear layer then select a vinyl no-wax top coat its the most affordable layer.
Also, pick an enhanced urethane coating for your vinyl to withstand for longer periods. This helps your flooring to be more durable than other options as well. You can even try to install a choose wear layer of 10 mil or other aspects. In case, if you want to opt for 20 mil wear then you should consider that for residential areas only.
Color and width:
Finally, after choosing the best wear layers and thickness, you have to select the perfect color and width for it. By selecting the perfect width and color which suits your flooring. Usually, printed vinyl flooring is more affordable and it is covered with a clear coat. So, if you are opting for real affordable flooring then check this option or else try out other alternatives.
Cleaning the floor is never fun; but fortunately, some types of flooring make the job much less of a chore. In particular, ceramic tile is especially popular because it’s extremely low maintenance and easy to clean. In most cases, you can clean tile with a mild cleaning solution diluted with warm water.
However, sometimes life presents us with challenges — including tough stains that won’t come out, no matter how hard you scrub.
Depending on the type of cleaning job you’ll be doing, you’ll need at least some of these items:
Scrub brushes of various sizes
Toothbrush (or electric toothbrush) for grout
Broom and dustpan
Commercial cleaning products
Warm or hot water
Empty spray bottle
Wood craft stick (blunt-edge) or silicone-tipped stick
How to Clean Hard Stains and Marks on Tile Flooring
To remove stubborn stains from tile, it’s a good idea to first try all the conventional methods you use to clean your floors. If the usual cleaning products aren’t doing the trick, then it’s time to try a few of these DIY methods.
Important note: Before applying any type of cleaning product, first check to see if your floor manufacturer offers a tile stain removal guide. Also, make sure that the product you’re using — even if it’s a mild DIY solution — is safe for your floors. Some basic home products, such as vinegar, can wreak havoc on some types of tile (such as marble, see notes below), so always check first before applying anything.
Saturate a cloth with hydrogen peroxide and place it on the stain. Blot up the ink with the cloth, pressing firmly. Make sure to use a clean part of the cloth with each area so you won’t spread the stain.
Saturate another clean cloth with hydrogen peroxide and lay it on the stain for five minutes.
Rinse with water. If there’s any ink residue, apply several drops of an oxygen-based cleaner (the type that bubbles up) to the stain residue, and scrub with a soft brush. Let sit for 15 minutes, then rinse with water and dry.
3. Diluted Bleach
Important note: For cleaning tile floors with bleach, the recommended ratio is ¾ cup of bleach for one gallon of water. For disinfecting an area, experts recommend a 10-to-one ratio, with one cup of bleach mixed with ten cups of water. If you’re spot-cleaning stains with only a small amount of water, you’ll want to use just a few drops of bleach.
Saturate a cloth with the diluted beach mixture and place it on the stain. Leave for around 15 minutes or until the stain is gone, then rinse the area thoroughly with plain hot water.
Important note: For cleaning any type of blood stains, it’s crucial to wear rubber gloves. These will protect your hands not only from the blood but also from the strong chemicals in the cleaning solution.
Using the 10-to-one ratio for disinfecting, fill a bucket with one cup of bleach and ten cups of hot water, and mix the solution thoroughly. Pour the diluted bleach over the stain — or you can also put the solution in a spray bottle and spray it on the tile.
Wipe the area with a towel, cloths or paper towels. Repeat the first step again, and this time leave the solution until it evaporates — by then, the bleach smell should be gone. This will disinfect the area.
Important note: In some cases, the bleach solution might actually remove the bloodstain as well. If it doesn’t, then proceed to the next steps.
Rinse the area thoroughly with water to remove all traces of the bleach (this will prevent bleach residue/fumes from interacting with the cleaner you’re going to use).
Saturate a cloth with hydrogen peroxide and place it on the stain. Let it sit for several minutes. The peroxide should absorb the bloodstain.
Rinse with warm/hot water and dry thoroughly.
If any of these DIY solutions don’t work, you can try your luck with one of the many commercial stain removers available. Just be sure to read the label first to ensure that the solution won’t damage your tiles.
Gum, Tar or Wax Stains
Apply bagged ice cubes or an ice pack to the area and let this sit until the staining substance is cold and has solidified.
Using a blunt-edge wooden craft stick or silicone-tipped stick (this will prevent scratching the tile), remove as much of the substance as you can.
Wipe with paint thinner, making sure not to get any on the grout.
Rinse with water and dry.
Cleaning Hard Water Stains
We all know that certain foods and beverages, blood, hair dye, lipstick and other substances are notorious for leaving hard-to-remove stains, but did you know that water can also be a culprit? If you live in an area where the water contains high levels of magnesium and calcium, this so-called “hard water” can leave mineral deposits on your tiles.
While most other stains are caused by substances spilling on the floor, these mineral deposit stains can appear just from turning on the sink or the shower. Plus, they’re made all the worse when you step in the shower or tub, because the dirt from your feet gets ground into the mineral deposits and stays there, making the stains look even grungier than before.
First, double up several paper towels (or use cleaning cloths) and saturate them with vinegar.
Next, place the saturated towels on the affected tiles. Leave them there for at least eight hours.
Remove the towels. You should see a marked difference; but if you still see a lot of mineral residue, repeat the process until the tiles look clean.
Important note: Do not apply vinegar to marble tiles or natural stone floor tiles without first making a test, because the acid in vinegar might spoil the surface. To make a surface test, soak a cotton swab with vinegar and swipe it over a small, undetectable area on the tile, then leave it for several hours. Rinse the tile and check to see if the finish has been altered by the vinegar.
Cleaning Stains on Grout
Cleaning grout can pose a challenge, because grout is porous and can absorb stains, making them difficult to remove.
First, wipe down the area with hot water to remove surface dirt.
Next, fill an empty spray bottle with a mixture of half hot water, half white vinegar.
Spray the solution on the grout, then let it stand for five minutes.
Scrub the grout with a soft toothbrush. For extra power without extra effort, use an electric toothbrush at a high setting.
Rinse the area with water.
Important note: Don’t use a metal brush — it will scratch the tile and could even pull pieces from the grout.
2. Sandpaper Method
Fold the sandpaper, then rub the creased edge along the stained grout line, going back and forth until the stain is gone. Rinse with hot water.
3. Pencil Eraser Method
Take a pencil eraser and rub it along the stained grout line, going back and forth until the stain is gone. Rinse with hot water.
4. Baking Soda/Peroxide Method
This method is ideal for porous tile such as marble because you won’t need to use vinegar or any other acidic solution.
In an empty spray bottle, mix one-part peroxide with two parts baking soda.
Spray the solution on the stained grout, and scrub the area with a soft brush. Be sure to use a soft brush on porous or marble tile so it won’t scratch the surface.
You can also make a paste of two parts baking soda mixed with one part water. Apply the paste to the stain, let it stay overnight, and then scrub the stain with a soft nylon brush. Rinse the area with hot water when you’ve finished.
However you decide to clean grout, once the area is thoroughly clean, let it dry for 24 hours. You can protect the grout from further stains by applying a silicone-based grout sealer, which is specially formulated to repel dirt and resist stains. If the grout is in a high-traffic area, be sure to apply this sealer at least every two years.
How to Properly Care for Tiles
It’s important to clean your tile floors regularly so that moisture and dirt won’t accumulate. According to the experts, you should try to fit in a regular wet flooring cleaning at least once a week for your bathroom, and every two weeks for your kitchen. In addition to routine mopping, you should also sweep or vacuum the floor at least once a week. Otherwise, dirt and grit can build up and scratch the surface of your lovely tile.
Protecting Your Flooring: Things You Should Avoid
Stain removal products and cleaners that aren’t compatible with your flooring — always read the labels and, if necessary, check with your flooring manufacturer.
Hard bristle or wire brushes, or steel wool pads: These will scratch your tile.
Chemical cleaners that might interact with each other. For example, ammonia is notorious for interacting with other cleaners, so always read labels before using.
Chemical cleaners that emit fumes. Use these sparingly, and be sure to work in a ventilated area whenever possible. Keep kids and pets away while you’re cleaning.
Wearing certain types of high heels or cleats that can scratch your tile.
Dropping heavy objects — this can break your tile.
Dirt accumulation: This is a tile floor’s worst enemy.
Spills: Wipe them up immediately, or they’ll discolor your tile. After cleaning, always dry your floor thoroughly.
Oil-based cleaners: When used on glazed or shiny tiles, oil-based cleaners will create a too-slippery surface that can cause accidents.
This might sound overwhelming; but the good news is you won’t even need to leave your house because Express Flooring brings all the swatches, samples and catalogs you’ll need right to your living room. With the help of one of our design consultants, you can choose the perfect flooring for your home and lifestyle. Once you choose, we’ll give you an affordable flooring sale and installation price that includes everything, including next-day installation. We’ll even remove and replace your furniture, so you won’t have to lift a finger.
Why Buy Ceramic Tile from Express Flooring?
Free in-home design consultation and estimate
Low discount flooring sale and installation deal
Expert installation, plus furniture removal/replacement
Discounts for seniors, teachers, public service workers and government employees
If you’re ready to start shopping for beautiful ceramic tile — or any other type of flooring — and you’re near Phoenix or Tucson, be sure to call or email Express Flooring for a free in-home estimate and design consultation. That’s all you have to do, because we’ll do the rest. Once you make the call, you can be days away from having beautiful, luxurious decorator ceramic tile in your home, at a price you can afford.
Ceramic is very versatile and have the ability to withstand water and stains, however, you must be aware of the location in which you place ceramic tile. The construction of the material comes in red, white, or brown clay and is less dense and softer than porcelain. Its composition is made up of sand, clay, and other natural materials needed to withstand high temperature for molding. It is a heavy material and isn’t generally recommended for higher story installations because you don’t want to put too much pressure on the floor joints. Continue reading →
While many homeowners long for a hardwood floor, others are desperately seeking ways to cover theirs up. Some houses have wood flooring that is either inferior wood or is badly scratched or damaged. Likewise, some houses — particularly older homes — were built with a hardwood subfloor that isn’t of a high enough quality (or is too worn) to refinish and expose. Continue reading →
There’s nothing like luxurious hardwood flooring for transforming a home into a spectacular showplace. With all its benefits and allure, there’s no real downside to hardwood flooring; but, as with any type of flooring, it does require a certain amount of maintenance to prevent damage. Continue reading →
After several years of use and foot traffic, your carpet may need to be stretched, especially if there are any lumps, wrinkles, or damaged areas. If you’re wondering how to stretch carpet yourself, this guide will take you through the process, before offering additional tips and recommendations. Continue reading →
If you own a bar or restaurant, then you know how important the right flooring is. From easy maintenance to longevity, it’s an investment that is crucial to your profits. Flooring for the “Front Of House” is just as crucial as flooring for “Back of House”.
By the way, extra points for you if you can identify the local restaurants in the images.
Here is a guide to the best types of commercial restaurant flooring or bar flooring so you can make an informed decision.
A lot of things change when you have kids. You may even decide that you want to replace your current flooring with new flooring that’s better for your whole family. Express Flooring can help you explore a variety of products to make sure you choose one that meets the needs of your family’s adults and kids. Continue reading →