Reasons to choose Porcelain Tile (Quick Guide)

Porcelain Flooring:

Porcelain tile flooring is made up of dense, heavy clay-similar to ceramic- that makes a fine choice for both outdoor and indoor use.

Should it take a hit from severe impact, these tiles can be easily replaced without a problem.

Beautiful Porcelain Tile Flooring

Points to Remember:

  • Its liquid-resistant compounds make the perfect flooring for any bathroom or changing area where water is commonly present.
  • Its weight makes it much heavier and tedious to cut, making it durable and more expensive than ceramic. Porcelains percentage of kaolin is much higher and is resistant to fire or flame.
  • These tiles are made to withstand many years of wear and tear! That being said, you can expect to get up to a decade (or two!), if properly taken care of and an expert demonstrates correct installation.

Porcelain is a low maintenance flooring option:

Want a low maintenance floor for when the kids invite their friends over for a pool party? Porcelain might be your best friend. A quick spot clean with a damp rag and an occasional mopping and sweeping is all that a busy homeowner needs to maintain their porcelain floors. The cost of porcelain is much more expensive because of the durability and weight, making the installation process a little more tedious.

Porcelain Tile Cleaning Process

Although porcelain tile is extremely durable and able to withstand water damage of any kind, you should know that grout can still harbor between the lines of each tile. Since grout is porous, it’s best to seal the connecting lines (from one tile to the next) so damage doesn’t have a chance. Formation of mold and mildew is still possible with porcelain because over time, humidity and moisture can still penetrate through the layers, causing discoloration. Porcelain flooring has freeze/thaw resistance (perfect for outdoor use!) and lower moisture absorption.

Let’s have a look at the reasons to choose porcelain tile:

Additionally, it’s suitable for radiant in-floor heat to keep warm under your foot in colder climates. Porcelain offers unmatched design versatility. Tiles can mimic natural stone varieties, such as granite and limestone.

There are two basic types of porcelain tiles:

Through-bodied: These tiles can be used for both residential and massive commercial installations. The color and texture run through this type of tile, disguising chips or scratches. Extreme Strong and durable, it contains no glaze that can wear off. It’s suitable for floors, walls, and countertops.

Glazed: This tile is completely covered in a wear layer or hard finish that is typically colored. It is strong and dense and offers the widest range of colors and designs.

Glazed Porcelain Tile

Unglazed: These tiles are very tough and they are extremely vitreous and dense. They are a through-color product and in very heavy traffic areas like hallways they may wear but will retain their original color. Unglazed porcelain tiles are available in various finishes, from matte to high gloss, and some have textured finishes, made to imitate natural stone.

Unglazed Porcelain Tile

Considerations When Choosing Porcelain Tile:

Durability: Porcelain tile is one of the most durable tough enough floor coverings and will last for years. Its surface is hardened enough to stand up to heavy foot traffic. It doesn’t dent or wear down. Scratches are extremely rare and stain resistant too. Porcelain is an ideal choice if you have children or pets.

Pet-friendly Porcelain Tile Flooring

Easy Care Routine: Porcelain is easy to clean and suits more for a busy lifestyle. It needs just a mop to keep it clean. Sweep or vacuum your porcelain floor regularly and damp mop weekly. Avoid abrasives such as steel wool and scouring pads. Unglazed porcelain requires more frequent cleaning. You can even use a steam mop to sanitize it in an Eco-friendly way. You can spend less time cleaning and more time relaxing with porcelain tiles installation.

Underlayment: Porcelain tile should be installed on a sub-floor that’s smooth, flat and rigid. It can go on a concrete slab, cement-based backer board, underlayment-grade plywood, and existing tile if it’s in good condition.

Promotes Health: Porcelain has a solid surface that does not trap allergens. It can inhibit the growth of bacteria. It also prevents the growth of mold and mildew. Porcelain tile is a safe material for every room in the home. Affordable Premium quality, at the lowest possible pricing.

The Lowdown: Porcelain is crafted from a mix of fine clay and minerals fired at extremely high temperatures, making it harder and denser than ceramic tile. Porcelain resists staining, water, bacteria, and odors. It’s difficult to scratch, resists fire, and comes in a variety of shapes, colors, and styles. Keep in mind that without radiant heat underneath, ceramic tile can be cold on your feet, and it can be uncomfortable to stand on for long periods. Also, be aware that the tiles can crack and the grout can become stained.


At the cost of $3 to $10 per square foot, porcelain is fairly difficult to install. As such, installation is usually best left to professionals.

Conclusion: Porcelain tile can be perfect for homeowners with the best combination of ease and style. There are a handful of reasons to choose this material for your floor covering with many benefits of choosing porcelain tile for your home.

Reasons to choose Porcelain Tile (Quick Guide) was last modified: March 14th, 2019 by Express Flooring